AI Wastewater Treatment Cases - Page 11

Three-Level Environm

Emergency wastewater holding tank: among the six variables in the volume formula, only two can be changed by design.

Multi-industry nationwide (chemical/petrochemical/coking/pharmaceutical/industri

Emergency accident pools at individual enterprises range from 90 to 2,300 m³, wh

In chemical industrial parks and hazardous chemical enterprises, the volume of emergency pools for accidental wastewater is calculated by Vtotal = (V1+V2−V3)max+V4+V5. Among the six variables, the leakage volume is determined by the process, the firefight

View Details

Online Monitoring of

Wastewater online monitoring: the gap between instrument readings and laboratory results is not an error—it's a difference in measurement basis.

Nationwide multi-industry (polluting units such as municipal wastewater treatmen

Single station with 1 discharge outlet and 4–7 indicators (COD / ammonia nitroge

At the same discharge outlet, in the same minute, online instruments and laboratory analysis can produce two different numbers. In most cases, the difference is not due to instrument accuracy, but rather to the different sampling time points, the differen

View Details

Preparation of Elect

Electronic-grade ultrapure water: A single "18.2" conceals four prerequisites, and two impurities it can never detect

Publicly available data from multiple industries nationwide (integrated circuit

Pilot to engineering scale (single plant at tens of thousands of tons/day; ultra

Resistivity hitting 18.2 MΩ·cm—many people take this as the report card of ultrapure water. In fact, it only keeps one ledger: the ionic ledger. This article breaks down several key specifications of electronic-grade ultrapure water: why "18.2" must be qu

View Details

Blower Aeration Syst

Aerator: The efficiency on the nameplate is measured in a clean water tank.

Multi-industry nationwide coverage (municipal wastewater treatment / centralized

Pilot to full-scale engineering (tens of thousands to 120,000 m³/d; hundreds to

For the same diffuser, the clean-water bench test shows 26%, while your tank achieves only 10.4%. Between them sit two coefficients, α and F, yet neither appears in the product literature. This article unpacks several key conventions in diffused aeration:

View Details

Refinery/petrochemic

Refinery Water System: The Hardest Stream Accounts for Only 10%, Yet the Compliance Figure Hides in the Denominator

Multi-industry nationwide (petroleum refining/refining-chemical integration), in

Pilot to engineering scale (single-plant wastewater at hundreds of m³/h; sour wa

In a refinery, more than 80% of the wastewater is oily wastewater, yet over 90% of the sulfides and ammonia nitrogen in the entire plant are concentrated in the sour water, which accounts for only 10% to 20%. This article breaks down six dimensions of the

View Details

Water management for

Water management across the entire power plant: water exits through the cooling tower, while salts can only exit through the desulfurization tower.

Nationwide multi-industry (coal-fired power generation and combined heat and pow

Engineering-scale (single plant 2×300 MW to 2×1000 MW; desulfurization wastewate

Water at a thermal power plant has only two exits: evaporation from the cooling tower and blowdown from the desulfurization tower. This article breaks down the plant-wide water system into six perspectives: why the water intake quotas of three cooling rou

View Details

Cases

About Us

Core Products

Quick Links

Contact Us